EMail Us: yachen_du@163.com


Industrial Blowers Inspection

Third Party Industrial Blowers Inspection article provides you with information about the fan and blower testing and fan and blower inspection in the manufacturing shop.

This content guides you through all the necessary stages in the production of the fans and blowers, including the raw material, final inspection, preservation and packing, and dispatch to site.

All fan or blower inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.

Our Industrial Blowers Inspection as following:

 Item  Activity Description  Inspection Content  Inspection Class
 1  Raw Material Inspection Raw Material Visual
Review MTC
Welding Material
2  Forging Class III, IV  Visual inspection for forging defects
Surface NDT
Tractability Check
3  Components Manufacturing Connecting rod
Connecting rod bolt
Cylinder shell
Cylinder cover
Machine body
4  Components Manufacturing Bent axle
Piston rod
Sealing element
5  Complete Machine Assembly Check the equipment of tolerance and clearance
Check drawing
6  Hydro Test Check Hydro water, pressure gauge scale
Pressure value, Holding time
7  Factory Acceptable Test  Main bearing temperature, Speed, Oil pressure, Vibrator, Temperature of piston and connecting rod
8  Painting  Painting visual inspection
9  Packing and Marking  Marking and Nameplate

Our inspection activities track:

  • Shandong Zhangqiu Blower Co., Ltd
  • Shenyang blower (Group) Co. Ltd.
  • Shaanxi blower machinery Co., Ltd
  • Shandong Linfeng Technical Co., Ltd
  • Jiangsu Xinli blower Machinery Co., Ltd
  • Shanghai Maokong  mechanical equipment co., LTD

Best Practice Recommendations:

  • Clear blower assembly
  • Evaporator coil, drain pan and condensate drain lines will checked
  • Checking gas leaks in gas furnaces
  • Burner assembly process
  • Verification ignition system and safety controls
  • Witness heat exchanger or heating elements
  • Dimension inspection for control box, associated controls, wiring and connections
  • Supervise conditioned airflow system
  • Monitor system starting characteristics and capabilities
  • Listen for abnormal noise
  • Monitor air conditioning and heat pump systems for correct refrigerant charge
  • Measure high and low side system pressures
  • Monitor system for correct line and load volts/amps
  • Monitor system operation per manufacturer’s specifications
  • Provide system operation report and recommend

World Class Quality Service for Industrial Blowers Inspection include:

  • Quality Assurance/Quality Control
  • Fitting Inspection
  • Vendor Audits
  • Expediting
  • Non-Destructive Testing
  • Laboratory Test Services
  • Document Control
  • Site Supervision, Third Party Inspection
  • Welding and NDT Procedures
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours:
Copyright © 2016 China Certification & Inspection Group Shaanxi Co., Ltd.
Technical powered by Trueniu.com